Pre-Painting
For the best results, the landing pad has been designed to be pre-painted. By painting the various levels different colours, some fantastic effects can be achieved.
Construction
Start by building the rampe frame with the base R10, the two sides R11 and R12 and the rear wall R14.
Attach the two sides and the rear to the base. Then add the two rear supports R13 to the rear wall R14.
Add the main ramp.
Glue the ramp ridges R18 to the ramp. These will stop models sliding down the ramp.
Then add R15 to the top of the ramp and R16 on top.
Add the top of the ramp R17 as below.
Glue the ladder rungs to each side.
There are also two extra vent grills that can be glued over the vents on each side of the ramp.
MDF Construction 